Insert Dump Bed
When you gotta move it.

You know who you are. You make America work hauling mulch, hauling firewood, hauling stone, unloading mulch, unloading firewood, or unloading stone. Why not make it easier? With the Magnum Insert Dump Bed for pick-ups, you can easily convert your standard 3/4 ton + pick-up truck into a high performance dump truck.

Now you can load and dump material with your standard pick-up truck without the expense of a dedicated dump truck. The Magnum Insert Dump Bed for pick-ups. Designed to make your work easier.

Converts a standard ¾ ton + pick-up truck to a dump body
3.5" bore cylinders
4000 to 7500 lb lifting capacity*
Grease fittings for 13 pivot points
Tethered control box (9' cord)
Double acting tailgate for metered control of material
Battery and pump shield for added protection for battery and pump
Six stake pockets for added capacity
Models available in carbon, stainless steel and heavy-duty stainless steel
Standard bolt-on cab shield
Standard vehicle harness kit

* Weight limits not to exceed manufacturer’s gross vehicle weight limits.

IDB4000 / IDB4000-SS General Specifications
Pick-up Bed Size:	short bed
Dump Bed Length:	6' 6"
Capacity:	1.5 cu yds
Lifting Capacity:	4000 lbs
Cycle Time:	40 seconds to dump at full capacity
Power:	12V DC
Floor Size (LxW):	75.5" x 48"
Weight (empty):	650 lbs
Dump Angle:	47 degrees
Tailgate:	Double Acting
Material Construction:	12 ga carbon / 14 ga SS
Cylinders:	Single 3.5" bore and 2500 psi working pressure
Hoist:	Scissor Lift
Hydraulic Hoses:	SAE 100 R2 3,500 PSI working pressure and 14,000 PSI burst pressure
Pump:	12 V Monarch® Electro Hydraulic
Paint:	Powder coated black**

IDB7500 / IDB7500-SS / IDB7500-SS-HD General Specifications
Pick-up Bed Size:	long bed
Dump Bed Length:	8' 0"
Capacity:	2.24 cu yds
Lifting Capacity:	7500 lbs
Cycle Time:	45 seconds to dump at full capacity
Power:	12V DC
Floor Size (LxW):	93.5" x 48"
Weight (empty):	750 lbs
Dump Angle:	47 degrees
Tailgate:	Double Acting
Material Construction:	12 ga carbon / 14 ga SS / 12 ga SS
Cylinders:	Twin 3.5" bore and 2500 psi working pressure
Hoist:	Scissor Lift
Hydraulic Hoses:	SAE 100 R2 3,500 PSI working pressure and 14,000 PSI burst pressure
Pump:	12 V Monarch® Electro Hydraulic
Paint:	Powder coated black**

SS = Stainless Steel
** Carbon Models Only

Cleveland, Ohio 44112 • info@magnumspreaders.com

Twin Lifting Cylinders

Provide maximum lift capability, while improved stability reduces the stress on the hoses and hydraulics. Competitive models typically feature one cylinder designs that twist and break during heavy usage.